Loading...Asian Tender

  • Refno: 16428403
    Uttar Pradesh >> Kanpur
    supply of kapton covered copper conductor dimension of bare copper 6.90plus/minus 0.07mm x 3.30 plus/minus 0.05mm and corner radius 0.8 plus/minus 0.1 mm,dimension over 2/3rd positive lap 67 percent to 70 percent insulation 7.26 x 3.63 mmmax. as per spec. no. 4tms .095.002 rev o dated 23-06-2011 for power coil of hitachiarmature.
    Amount(approx): Ref. Doc.
    Last Date : 10 Feb 2020
    22 Days left
  • Refno: 16421441
    Maharashtra >> Nashik
    supply of v insulation [rear] item no.1 of drg.no.3tmw/drg-ca-560/alt-0 and specification4tmw/spec/116/alt.2 for hs 15250 tm armature.[shelf life:12 months.] note:-scattered deliveryperiod 4 times.
    Amount(approx): Ref. Doc.
    Last Date : 29 Jan 2020
    10 Days left
  • Refno: 16417314
    Chandigarh >> Chandigarh
    procurement cat a spares.1.01 main bearing (g.e), part no. c-3 1.02 main bearing, part no.c-6 1.03 thrust washer , part no.c-8 1.04 intermediate bearing (half) , part no. 20 1.05 cylinder liner, part no. g-1 1.06 head gasket , part no. h-11 1.07 nozzle assembly ,part no. l-22 1.08 fuel filter element, part no. m-6 1.09 roller clutch, part no.asm-1 1.1 pinion leading face, part no. asm-3 1.11 armature , part no. asm-14 1.12 field coils , part no. asm-16 1.13 brake shoes, part no. asm-19 1.14 solenoid, part no.asm-25
    Amount(approx): 134.25 Cr.
    Last Date : 21 Jan 2020
    2 Days left
  • Refno: 16414217
    Maharashtra >> Nashik
    supply of non-calendered type polyamide sheet nomex 411, 0.58 mm x 965 mm wide x 20mtr. long conf. to hitachi spcen. no. a0164 alt-1 for hitachi armature. note: this itemis reserved for procurement from rdso approved sources only.
    Amount(approx): Ref. Doc.
    Last Date : 29 Jan 2020
    10 Days left
  • Refno: 16410909
    Maharashtra >> Nashik
    supply of commutator assembly with steel parts for tao-659 armature [17mm riserwidth] as per drg. no. 3tmw/drg-ca/553 alt-3 and specn. no. 4tmw/spec/168 alt.3 .
    Amount(approx): Ref. Doc.
    Last Date : 31 Jan 2020
    12 Days left
  • Refno: 16410909
    Maharashtra >> Nashik
    supply of commutator assembly with steel parts for tao-659 armature [17mm riserwidth] as per drg. no. 3tmw/drg-ca/553 alt-3 and specn. no. 4tmw/spec/168 alt.3 .
    Amount(approx): Ref. Doc.
    Last Date : 31 Jan 2020
    12 Days left
  • Refno: 16410890
    Maharashtra >> Nashik
    supply of fully machined shaft big dia for tao 659 armature as per drg. no.1tmw.drg-ca/.547 alt-1 and specn no. 4tmw/spec/165/alt-1.
    Amount(approx): Ref. Doc.
    Last Date : 13 Feb 2020
    25 Days left
  • Refno: 16410890
    Maharashtra >> Nashik
    supply of fully machined shaft big dia for tao 659 armature as per drg. no.1tmw.drg-ca/.547 alt-1 and specn no. 4tmw/spec/165/alt-1.
    Amount(approx): Ref. Doc.
    Last Date : 13 Feb 2020
    25 Days left
  • Refno: 16410582
    Uttar Pradesh >> Prayagraj
    ?stripping and cleaning of defective hitachi t.m. armature for the purpose of rewinding in armature section of tms/cnb..
    Amount(approx): 10.40 Lac
    Last Date : 12 Feb 2020
    24 Days left
  • Refno: 16410582
    Uttar Pradesh >> Prayagraj
    ?stripping and cleaning of defective hitachi t.m. armature for the purpose of rewinding in armature section of tms/cnb..
    Amount(approx): 10.40 Lac
    Last Date : 12 Feb 2020
    24 Days left
  • Refno: 16408632
    Maharashtra >> Nashik
    supply of fully finished shaft for hs 15250 armature to drg. no. 1tmw/drg-ca-552.alt.5 or latest. and confirming to clw specification no.4.tms/095/005rev-0 alt.2.
    Amount(approx): Ref. Doc.
    Last Date : 30 Jan 2020
    11 Days left
  • Refno: 16408632
    Maharashtra >> Nashik
    supply of fully finished shaft for hs 15250 armature to drg. no. 1tmw/drg-ca-552.alt.5 or latest. and confirming to clw specification no.4.tms/095/005rev-0 alt.2.
    Amount(approx): Ref. Doc.
    Last Date : 30 Jan 2020
    11 Days left
  • Refno: 16408428
    Maharashtra >> Nashik
    supply of spiral tube for hs 15250 armature id 6.5 [six point five] mm, kapton connexkctun as per hitachi specification no. ao 267 alt-h or latest, length of spiral tube1000/500 mm.
    Amount(approx): Ref. Doc.
    Last Date : 13 Feb 2020
    25 Days left
  • Refno: 16408428
    Maharashtra >> Nashik
    supply of spiral tube for hs 15250 armature id 6.5 [six point five] mm, kapton connexkctun as per hitachi specification no. ao 267 alt-h or latest, length of spiral tube1000/500 mm.
    Amount(approx): Ref. Doc.
    Last Date : 13 Feb 2020
    25 Days left
  • Refno: 16406145
    Maharashtra >> Nashik
    supply of polymide glass moulding wedges, gi61n confirming to specification no. f-0006, drg. no. 10s784.757 alt-c for hs 15250 armature.
    Amount(approx): Ref. Doc.
    Last Date : 13 Feb 2020
    25 Days left

View armature Tenders

Get armature tenders information from Indian Government, Private Sector, State Government, Municipal Corporation, Panchayat , Banking Sector and all co-operative and other sectors at Asian Tender

Follow Us
Get the latest tender information delivered daily!