Active tenders in Heat Shrinkable Sleeve

tender for shrinkdown sleeve 25.4 x 0.38 pes tr clw spec.no/drg. no. clw/es/3/0154 alt-q .

tender for set of ems 478 silicon elastomer coated fiber glass sleeve of id-18 mm and od-20 mm, thermalclass-h, di-electric strength: not less than 5kv/mm thickness, working temp. range: -60 deg celsius to 200 degcelsius. consisting with 3 types of colours. 1) red colour = 250 mtrs. 2) blue colour = 250 mtrs. 3) white colour= 250 mtrs. make: kiran udyog/ alphawire/ qualtek/ bhuwal/ varflex or equivalent. note:1. sample to beapproved by consignee prior to bulk supply. 2. the fiber glass should be rohs and reach complaint. 3.material to be supplied in continuous spool as per mentioned colours. 4. the material should be technicallycompliant to ul 1441 grade a certificate. test reports for the compliance of above standards from themanufacturer to be submitted along with material.

tender for heat shrinking sleeve transparent sleeve type t/11a to use in cable size 225 sq.mm 1500v.specification: clw specn. no. - clw/es/i-15/h .

annual rate contract for supply of shrink sleeves for 200 ml sfm glass bottles.

tender for set of dual wall polyolefin heat shrinkable sleeves of size 39/13 colour black, red and yellow(qty:-01 mtr each) .

tender for heat shrink sleeve type ta. as per clw spec no. clw /es/i-15 alt-e (2) size: dia:19 mm,wallthickness: 0.76 mm to 0.66 mm.as per clw approved sources only.

tender for set of transparent heat shrink sleeves ( 2 types) as per clw.spec.no: clw/es/i-15/h or latest ifany. set details mentioned below. 1) type 5a. qty. - 1000 mtrs./set. 2) type 11a. qty.- 500 mtrs./set.

indigenous development of sheatheat shrinkable for m-53 aero engine

tender for traction transformer with required number of secondary traction windings along with protectionequipment, safety chain arrangement and ht cable with protection shield including termination crimping lugs,cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipmentmounting and earthing hardware and accessories including auxiliary machines such as oil pump, oil coolingblowers etc (one set per basic unit). note: quantity includes 12 sets as spares.

tender for heat shrinkable sleeve transparent to specification 1. shrink temperature 900ctemperature range 1250c radial shrinking ratio greater than or equal to 50 2:1 2. longitudinal change less thanor equal to and plus or minus 5tensile strength greater than or equal to 10.4mpa 3. ultimate elongation greaterthan or equal to 200 4.aging in circulating air oven 158.00c plus orminus 1.00c, 168hrs.after aging tensilestrength greater than or equal to 7.3mpa after aging ultimate elongation greater than or equal to 100 5. volumeresistivity greater than or equal to 1014 cm dielectric strength at 1mm .ac 2500v no breakdown 6. flammabilityvw-1 concentricity greater than or equal to 65 required item to inner dia of transparent heat shrinktubing/sleeve set,to inner dia 30,25,20,16,10,8,6 and 4 each 500mts of make /brand , woer,ashwin,orany other reputed make .

tender for set of cross linked polyolefin heat shrinkable shrinkage sleers forcontrol cable sketch no.bsl/elw sk no 9036 alt-03.

tender for set of heat shrinkable sleeve of size 10mm -1mtr & size 15mm-1mtr colour transparentconfirming to icf specification no.icf/elec/072. make icf approved make, .

supply of electrical sleeve varnished, dia: 1 mm, length 1mtr.

tender for set of cross linked polyolefin heat shrinkable shrinkage sleers forcontrol cable sketch no.bsl/elw sk no 9036 alt-03.

tender for transparent heat shrinkable sleeve (polyolefin) as per clw specification no. clw/es/spec/i-15type 9a id 25.4mm .

tender for a set of silicon elastometer fibre glass sleeve consisting of 03 types - a. siliconelastomer coated fiber glass sleeve s.no. property typical value 1. workingtemprature range -60c to 200c 2. di-electric- strength not less than 05 kilo volts/ mmthickness 3. thermal class h class 4. id of the sleeve 18 mm 5. od of the sleeve 20 mm 6.sleeve colour red 7. material to be supplied in continous length, qty - 1000 meter b.silicon elastomer coated fiber glass sleeve s.no. property typical value 1. workingtemprature range -60c to 200c 2. di-electric- strength not less than 05 kilo volts/ mmthickness 3. thermal class h class 4. id of the sleeve 18 mm 5. od of the sleeve 20 mm 6.sleeve colour normal (white) 7. material to be supplied in continous length, qty - 1000meter c. silicon elastomer coated fiber glass sleeve s.no. property typical value 1.working temprature range -60c to 200c 2. di-electric- strength not less than 05 kilo volts/mmthickness 3. thermal class h class 4. id of the sleeve 18 mm 5. od of the sleeve 20 mm6. sleeve colour blue 7. material to be supplied in continous length, qty - 1000 meter .

tender for sleeve set of polyolefin heat shrinkable as per clw spec.no.clw/es/i-15.one set consisting of [i] type-9a-10 mts.[ii] type-10a-22 mts.[iii] type-11a-24 mts. [iv] type- 12a-16mts.

tender for hot air heat shrink sleeve gun at 120 v / 1800 w,temp.50 u2013 650b0c,air volume 200 -350 l/min [60 at max. temp],emission db (a) < 65,. dimensions l d7 h d7 b (f8 handle) mm 270 x 270 x75 (45),weight g 750,conformity mark ce protection class ii adjustable air flow 5 steps ,handle u220545mm,eco moe function for 40 energy saving,auto cool down ( tool inactive for 10 mins),soft touch keypad(180b0 operability ),brushless motor operation,simple e-drive control ,easy to clean air filters, protectionagainst overheating,automatic heating element protection part no.: 162.273 similar to leister make .

tender for a set of silicon elastometer fibre glass sleeve consisting of 03 types - a. siliconelastomer coated fiber glass sleeve s.no. property typical value 1. workingtemprature range -60c to 200c 2. di-electric- strength not less than 05 kilo volts/ mmthickness 3. thermal class h class 4. id of the sleeve 18 mm 5. od of the sleeve 20 mm 6.sleeve colour red 7. material to be supplied in continous length, qty - 1000 meter b.silicon elastomer coated fiber glass sleeve s.no. property typical value 1. workingtemprature range -60c to 200c 2. di-electric- strength not less than 05 kilo volts/ mmthickness 3. thermal class h class 4. id of the sleeve 18 mm 5. od of the sleeve 20 mm 6.sleeve colour normal (white) 7. material to be supplied in continous length, qty - 1000meter c. silicon elastomer coated fiber glass sleeve s.no. property typical value 1.working temprature range -60c to 200c 2. di-electric- strength not less than 05 kilo volts/mmthickness 3. thermal class h class 4. id of the sleeve 18 mm 5. od of the sleeve 20 mm6. sleeve colour blue 7. material to be supplied in continous length, qty - 1000 meter .

tender for high temparature resistance sleeve 8 mm inner dia fibre glass braidedcoxially expandable ,outer side coated with heat reflective high temparatureresistance elastomer. hsn code:-7019 make:-cotronics,corrium,chestarton .