Active tenders in Helical Gear

supply of reverse gear (main shaft) helical (1st speed m/shaft synchro ring (2nd/3rd with oil grooves) synchro ring (4th with oil grooves) deep groov ball brg (6308rsr) spacer carrier retention spring roller cage reverse idler gear shim 0.125 shim 0.240 shim 0.500 tapper roller brg 30306 (30x72x20.75) counter shaft constant mesh gear 4th gear (counter shaft) gasket gasket (front cover to hsg) gasket ptfe seal (57x39x9/ rh) ptfe seal (68x48x10/ lh)

supply of corrugator machine helical gears as per the scope of the tender.

supply of 1 lv7/tmb, 2699-4660-0121, tie rod end lh 2 lv7/tmb, 5330-002967, oil seal(mico) 3 lv7/tmb, 2702-8240-9972, wiper blade front (driver co driver ) 4 lv7/tmb, 2751-1540-0112, brush gear assy 5 lv7/tmb, 2668-3560-7701, oil seal (inner )135x170x15 6 lv7/tmb, 2786-0999-9922, clamp hose 7 lv7/tmb, 4710-000158, assy fuel line (fuel feed pump to fuel f 8 lv7/tmb, 2534-1813-0165, assy oil filter(spin on type 4x4) 9 lv7/tmb, 2505-3014-5401, 4th gear on counter shaft 10 lv7/tmb, 2576-7230-0147, assy handle outer (door lh) 11 lv7/tmb, 3503-4010-500, l/d screw driver 0.4x2.5x50 12 lv7/tmb, 6212-0300151, parking bulb hl 12v4w din 72601 13 lv7/tmb, 2573-4310-6606, un loader plunger 14 lv7/tmb, 322-260-0644, helical gear 3rd speed 15 lv7/tmb, 2625-8081, field coil assy 16 lv7/tmb, 6222-030012, lamp 12v 2w(black out lamp rear)ts 29201

to manufacture and supply of helical gear and bearing housing

supply of 1 207588707707, sealing rubber eng hood 2 254709139918, service indicator 3 209928400107, assy link rod (for agb shifting) 4 269126519901, brass pad 5 269126250126, assy drive shaft 8.47 thrust brg arrgmt 6 269126203103, taper roller brg 7 269126200189, assy helical gear 5th speed 8 287629100101, assy clutch booster dia 70 9 206730100111, assy pull cable engine stop 10 257432100122, kit front shackle pin 11 3523200163 206032400107, assy sprg shackle 12 257435154221, u clamp 13 257332400123, kit rear spring pin 14 257332400119, assy sealing ring 15 257433158204 3223310109, seal holder(outer) 16 3273530272, nut 17 257433256501, groved nut 18 257342118210, dust cover bottom 19 257641116101, locking plate (prop shaft) 20 263243700112, grad hand control valve 21 265146600102, assy uj steering 22 209749200119, assy exhaust pipe front 23 209949200112, assy exhaust pipe intermediate front 24 206950105852, rubber hose radiator to engine 25 261854440159, assy motorised head lamp 24v lh 26 276054400102, assy hatch back lamp 24v 27 261854440102, assy tail lamp rrh mssl 24v 28 261854544605, flasher sq (24v) 29 265154500114, assy push pull switch 30 257689100149, shock absorber for cabin mtg rear 31 350572030110, assy door lock lh 32 207588017701, beading fender 33 350572012301, glass door 34 350582040104, wiper blade 35 263282400108, assy wiper arm 36 350572030111, assy door lock rh 37 257681100153, assy rear view mirror lh 38 257344400128 278246609901, filter cartridge 39 257667106337, rubber mould wind screen 40 3523250101, rear spring bracket rear 41 265129107703, rubber cover bc 42 207583300101, assy cable air scoop 43 263281200101, assy t emblem over stylised (t 1212 bs iii) 44 277842138701, spring pull off cam end 45 278247507702, rubber packing 475 mm long 46 278247507701, rubber packing 47 209741100116, propeller shaft assy agb to ra 48 283954559924, hazard warning sw 24v 49 207854820127, wiring harness cab lamp 50 207552070110, assy air scoop lh 51 276782400105, wiper motor 52 206909130222, air inlet duct 53 278509139903, air filter secondaryq 54 277842130106, assy brake shoe with non asbestos brake lining (rear) 55 280642100101, brake chamber type 24 56 209754660114, wiring harnesstail bs-ii scam 57 277054249904, assy mag valve (ex brake) 58 263243710136, brake actuator 59 503043700114, duel brake vlave 60 278509139902, air filter element primary 61 264154500106, steering lock cum ignition switch 62 263254440108, assy blinker lamp lh w/o bulb 63 350568090131, assy glow box 64 209747900110, assy fuel line 65 209947100111, assy fuel tank comp 225 ltr round 66 209747900111, assy fuel line 67 885442011618, kit brake lining front side 68 277042300104, assy slack adjuster rear lh (auto) 69 20755207011, assy air scoop rh 70 3350572050111, regulator rh 71 207568900109, assy kit for glow boc lock and key 72 26325444109, assy blinker lamp lh w/bulb

supply of geared shaft and helical gear setas per annexure.

supply of helical bull gear and eccentric shaft.

supply of spare parts required for : tata 407 (4x4) bs-iii -1 265141106502 hex nut (m26x15) nos 1 2 266433355101 coupling flange forge nos 1 3 251526200117 assy pinion speedometer drive nos 1 4 285226203101 needle cage (3rd/4th gear) nos 1 5 285226355401 reverse idler gear nos 1 6 285226205404 helical gear (4th speed m/shaft) nos 1 7 285226305401 4th gear (counter shaft) nos 1 8 265142010105 assy vaccum booster with tmc bottle nos 1

supply of worm wheel (helical gear) as per drg. no. m/c-009 for.

supply of helical bevel geared motor.make:.

repairing of double helical/herringbone gear of production shaft winder-550hp at balaghat mine.

repairing of double helical/herringbone gear of production shaft winder-550hp at balaghat mine

tender for 1. helical gear(l.h),helical gear shaft(r.h) with key & spacer as perdrawing no. pl/spr/08/1740. 2. helical gear(r.h),helical gear shaft(l.h) with key as perdrawing no. pl/spr/08/1741. 3. output shaft with keys & spacer as per drawing no.pl/spr/08/1742.

tender for 2 stage combination helical & worm & worm wheel gear drive with crank insert, internal lockingfeature , oil filled & sealded type suitable for elb, make: heidz , global, hi tech or similar.

supply and fitment of helical gear shaft having no. of teeth 21,total length of gear shaft-230mmwith one side key way size- 28x12x06.material-en-24 .

various mechanical works- metal fabrication.- fabrication and erection of channel iron column to act as support for resting of monorail crane as per following details:- vertical posts = ismc 150 no. of vertical posts = 02 nos. vertical channel section each post = 02 nos. vertical post bracing = ismc 100 sole / matching plates = 500x300x12 thick height of vertical posts = 6m size of vertical post concrete blocks = 600x600x1200 mm(depth) concrete grade = m20 (1:1.5:3) welding electrode = overcord ss of adore/esab/landt/advani monorail section = ismb 200 length of monorail = 3.5m steel detail : i. ismc 150 6mx2x2 = 24 m @ 16.8kg/m = 403.2 kg ii ismc 100 0.25mx8x2x2 = 8 m @ 9.56kg/m = 76.48 kg iii plate 0.500x0.300x6 (12mmthk) = 0.90 m(12thk) = 84.78 kg iv monorail ismb 200 3.5 m @ 24.2 kg/m = 84.7kgs v bolts/nuts (l.s) = 20 kgs vi the job includes welding of isa 50x50x5 each 1 in length to the vertical post so as to act as ladder. 15 steps = 17.50 kg total = 686.66 say 690 kgs 02. providing, erecting testing and commissioning of manually operated spur gear short head chain pulley block isi marked/embossed with monorail, having the following: make = indef/globe/pull lift capacity = 2mt no. of chain falls = 4 min. height of lift = 6 m gears: - the hoist shall have precision cut super and helical gears made of alloy steel mounted on bearings and housed in a dust proof gear box. the lubrication of gears be of high viscosity and temperature for longer life of gears. load chain:- the load chain be made of high tensile alloy steel having wear resistance and greatest mobility. the chain should be accurately collaborated, tested and have adequate in built factor of safety for safer operation. load chain wheel:- specially designed, perfectly machined wheel providing correct grip of load chain made of malleable cast iron makes the hoist most safe and reliable against any failure. 01 job 03. tool kit for maintenance:- the tool kit for maintenance shall comprise of the following and all the items as mentioned below shall be of taparia make: i. open end spanner of size (4/5 to 30/32) (01 complete set) ii. ring spanner set of size (12/13 to 30/32) (02 complete sets) iii. combination pliers, 9 inch : (02 nos) iv. nose pliers 9 inch : (02 nos) v. screw driver (flat and philip tip)12 inch and 9 inch :( 01 no. of each size) vi. hammer with wooden handle, 1 kg and kg : (01 no each) vii. pipe wrench 24 inch and 18 inch : (01 no. each) viii. chain tong for holding min of 65mm dia pipe : (02 nos) ix. multi-meter clamp type: 02 nos (fluke/ meco/siemens/mastechmake) x. taparia s-16hxl socket set- (01 no.) 01 job 04. fabrication, welding and providing at site m s angle iron for fabrication of beds out of (isa-40x40x5 mm). the top of the bed shall be fixed with 19mm thick ply board of required size. the bed size one of 4x6 with 06 legs/vertical supports each of 2ft heigh

supply of rotary air lock feeder sew eurodrive helical bevel gear unit kaf87/a

helical gear head with gear.

helical gear head with gear ratio.

auction sale of lot no: 1920006.0 lot name: gear helical 3rd soeed 24 teeth