Active tenders in Hydraulic Cylinder

supply of cylinder hydraulic for prd dwn hsm-8915

supply of fly wheel clutch sleeve cylinder clutch master cylinder hydraulic pipe lines oil container pressure

estimate for replacement of south side return drum shaft block and hydraulic cylinder plate old feeder breaker bnr siding

tender for 1- seal for 250 tonne hydraulics power press. (1) seal kit for hydraulic cylinder bore: 407.21 mm,rod dia: 381 mm, hsn code 40169330 make- ank seal/ hindustan hyd./ parker only. qty. 01 set. 2- pistonseal for hydraulic cylinder, bore- 407.21 mm, rod dia- 381 mm, hsn code- 40169330, make- ank seal/hindustan hyd./ parker. qty. 01 set note:- supplier has to provide purchase proof of o.e.m. along with supply.

tender for one set of hydraulic puller consists of the following 7 items (1) hydraulic hand pump manuallyoperated, two speed, lightweight aluminium, incorporates a 2.0 litres usable oil reservoir, external pressurerelease valve, factory set safety relief valve and has a weight of 6 to 7.5 kg. pump offers a displacement of 12.9cm3 and 2.3 cm3 per stroke at first and second stage respectively and has a maximum working pressure of 700bar (10,000 psi.). similar to hi-force model hp232.-01 no (2) hydraulic pressure gauge of 63mm (2.5 inch)diameter, glycerine filled , dual scaled 0-700 bar / 0-10,000 psi with 1/4 inch npt bottom male connection.maximum pressure 700 bar (10,000 psi). - 01 no (3) hydraulic gauge mounting block for fitment of hydraulicpressure gauges, with 1/4 inch npt female gauge connection and 3/8 inch npt male to 3/8 inch npt female inletand outlet connections. maximum pressure 700 bar (10,000 psi)- 01 no (4) two metre length hydraulic hoseassembly, fitted with cm1 quick release coupler on one end and 3/8 inch -18 npt male fitting on other end.maximum working pressure 700 bar (10,000 psi) with safety factor of 4:1.-01 no (5) steel dust cap to suit cm1male half quick connect coupler.-01 no (6) hollow piston hydraulic cylinder of 60 tonnes capacity, single actingspring return, closed height 226-230mm, stroke length 76mm, centre hole diameter 55mm, outside diameter160mm. maximum working pressure 700 bar (10,000 psi). similar to hi-force model hhs603. -01 no (7) steeldust cap to suit cf1 female half quick connect coupler.-01 no acceptable make:- hi-force, vankos, oilair techniques or equivalent. note:hand pump should be filled with hydraulic oil handles to be provided forcarrying the pump and cylinders note: delivery at 5 different locations: (1) 01 no- gnt division: consigneeno: 004030 sse/tm/gnt address: office of the stmd,backside of scrap depot near nallapadu railwaystation, nallapadu, guntur, andhra pradesh ,south central railway-522005 ph.no.9701379225. (2) 01 no- gtldivision: consignee no: 054550 sse/tm/gtl address: office of the senior section engineer, satellitedepot,track machine, timmanacherla, guntakal, anantapur district, andhra pradesh-515801ph.no.9701374157. (3) 01 no- bza division : consignee no: 023310 sse/ cs/ryp address: office of the zonaltrack machine depot, near wagon workshop, rayanapadu, ibrahimpatnam mandal, krishna district, andhrapradesh, south central railway -521241 ph.no.9701373152. (4) 01 no- kzj division : consignee no: 014989sse/ tm/kzj address: office of the senior section engineer, satellite depot, track machine, near fatima flyover, kazipet, telangana, south central railway-506003 ph.no.9701371668. (5) 01 no- ned division :consignee no: 034071 sse/tm/ned address: office of the senior section engineer, satellite depot, trackmachine, mudkhed railway station, besides sse/p.way office , nanded district, maharashtra, south centralrailway -431806 ph.no.9730471232.

regarding the supply of various type of material at sakharkherda, tq sindhkhed raja dist. buldhana

tender for hydraulic cabin support cylinder for csm m/c plasser part no. hzmb.80.036.0210.2.024 as percpoh drawing no. c-1403 & specification no.tm/cpoh/cylinders-hyd-034rev-1 [acceptable make: plasseror equivalent] .

supply of set of spares & fitment of hydraulic cylinder of 40 ton hydraulic press,make-premiercontrol systems. or similar.the details of technical specification as per annexure-a .

tender for fabrication,supplying , testing and commissioning of hydraulic system for mounting anddismounting of tfpmph with hydraulic cylinder hand lever operated for wag-9/wap-7 loco, as per s.c.rlyels/lgd spec.no.c/els/lgd/hsm & dtfpmph/0041. specifications attached overleaf (in specifications of2.1, 3.2 and 11 els/lgd to be replaced as els/bza.) .

auction sale of lot no: 57.0 lot name: hydralic cylinder

supply of hydraulic cylinder for beml make pay loader.

procurement of hydraulic cylinder of stacker reclaimer 3 luffing for ntpc dadri

supply of hydraulic cylinder for ftv.

tender for heavy duty hydraulic cylinder 2h series, style bb clevis mounting, 4bore x 12 stroke x 1-3/4 rod dia. note:- cylinder bore & piston rod should be hardchrome plated. 2) seals should be interchangeble with parker seals.

overhauling of hydraulic cylinders, winches and deck traveling crane on dci dr xi

supply of 1 p/roll regulating hyd cyl,dwn:hsm-6866 p/roll regulating hyd cyl,dwn:hsm-6866 double acting type with cushioning at rod side and prepared for installation of a transducer system. technical data : as mentioned in drawing no. hsm-6866 scope of supply : a) cylinder prepared for installation of a balluf make transducer, type: btl5-s114-m914-z-ka05; 20 m /24 bit/ grey sleigend; power supply 24v dc system in cylinder bottom, position magnet is mounted into the position (the transducer is not included in scope of supply). b) 2 pieces spare seal set for each cylinder. c) one piece spare piston rod with rod-end eye and bushes for each cylinder . drawing no. : hsm-6866 note : the transducer details mentioned in specification supersedes transducer specification mentioned in the drawings. 2 no. 180 2 regulating hyd.cylinder r3, dwn:hsm-8771 regulating hyd.cylinder r3, dwn:hsm-8771 piston dia 180, rod dia 125, stroke 627 scope of supply: a) hydraulic cylinder should be made as per our drg.no. hsm-8771 and to be supplied with balluf make transducer, type: btl5-s114-m914-z-ka05; 20 m/24 bit/ grey sleigend; power supply 24v dc b) 2 pieces spare seal set for each cylinder. c) one piece spare piston rod with rod-end eye and bushes for each cylinder. drawing no : hsm-8771 note: the transducer details mentioned in specification supersedes transducer specification mentioned in the drawings. 2 no. 180 3 regulating hyd.cylinder r1, dwn:hsm-8769 regulating hyd.cylinder r1, dwn:hsm-8769 piston dia 180, rod dia 125, stroke 1025 scope of supply: a) hydraulic cylinder should be made as per our drg.no. hsm-8769 and to be supplied with balluf make transducer, type: btl5-s114-m1220-z-ka05; 20 m/24 bit/ grey sleigend; power supply 24v dc b) 2 pieces spare seal set for each cylinder. c) one piece spare piston rod with rod-end eye and bushes for each cylinder. drawing no : hsm-8769 note: the transducer details mentioned in specification supersedes transducer specification mentioned in the drawings. 2 no. 180 4 hyd.cylinder for side guide,dwn:hsm-9559 regulating hyd.cylinder for side guide,dwn:hsm-9559 piston dia 100, rod dia 56, stroke 760 scope of supply: a) hydraulic cylinder should be made as per our drg.no. 05160750 with integrated transducer system and with bearing in rod end eye. b) 2 pieces spare seal set for each cylinder. c) one piece spare piston rod with bearing in rod-end eye drawing no : 05160750/ hsm-9559 5 cylinder,hyd,double acting,bore : 450mm cylinder,hyd,double acting,bore:450mm rod dia-280mm,stroke-685mm along with 2 sets of seals and gaskets,hsm drawing no:s/7771 the seal kit should be of make: walter hunger/merkel/ trelleborg sealing soln./garlock/skf/parker 2 set 180 6 cylinder,hyd,double acting,bore:350mm cylinder,hyd,double acting,bore:350mm rod dia-200mm,stroke-600mm as per drawing no : hsm /7772 along with 2 sets of seal kit. the seal kit should be of walter hunger/merkel/ trelleborg sealing soln./garlock/skf/parker make . 1 set 180 7 cylinder,hyd,double acting,bore:180mm cylinder,hyd,double acting,bore:180mm rod dia-110mm,stroke-1500mm as per drawing no : hsm /7773 along with 2 sets of seal kit. the seal kit should be of walter hunger/merkel/ trelleborg sealing soln./garlock/skf/parker make 2 set 180 8 hydraulic cylinder,pn: 5.736382.t/001 hydraulic cylinder, pn: 5.736382.t/001 for vertical edger e2 assembly manufacturer : danieli <(>and<)> c part no : 5.736382.t/001

supply of hydr.cylinder-10ton enerpac-rsm-100 and all other spec. details avialable in list of items sheets

supply of hydra.cylinder -10ton make-enerpac,model-rsm-100 10ton single acting low height cylinder,stroke-12mm closed height-43mm

purchase of hydraulic grab spares

supply of 1 lv7/t-815 990-115-005-000 magnetic switch-19024320 na 5 nos ishan.uppal254 194101 30 2 lv7/t-815 273-221-951-854 sealing ring na 11 nos ishan.uppal254 194101 30 3 lv7/t-815(4x4) 442-075-090-054 ball socket na 5 nos ishan.uppal254 194101 30 4 lv7/t-815 990-100-955-000 interference element 371325031 na 4 nos ishan.uppal254 194101 30 5 lv7/t-815 272-212-040-000 cone belt -av x 13x750 na 23 nos ishan.uppal254 194101 30 6 lv7/t-815 443-979-642-281 fuel feed pump cd 6a 2281 na 3 nos ishan.uppal254 194101 30 7 lv7/t-815 990-115-011-000 brush set -19024644 na 3 nos ishan.uppal254 194101 30 8 lv7/t-815 993-200-636-0 solenoid na 3 nos ishan.uppal254 194101 30 9 lv7/t-815 442-070-880-034 injection cylinder va51p490-2987 na 3 nos ishan.uppal254 194101 30 10 lv7/t-815 150-200-004-004 hydraulic cylinder hm 50/25/400-111.111 na 3 nos ishan.uppal254 194101 30 11 lv7/t-815 627-936-002-000 air filter cartridge - vs 13 (cleaner na 8 nos ishan.uppal254 194101 30