supply of necessary items required to raithabhavana at main market yard apmc thirthahalli-supplying of steel single cot with mosquito curtain frame of size 36*78 inches, 18 inches from ground level and 60 inches height of the mosquito stand from the ground level, mosquito stand frame of round shape pipe thickness-3/8 inches, leg with plastic bushes, 1mm (16gauge) thick bed top sheet with one quote primer, 2 quote enamel paint with spray each item rate includes all taxes supplying mattresses- 70 density, 60mm coir,2 inches foam-28 density, double foam qualiting provides comfort each item rate includes all taxes blankets of size 70*90 polo, 800gms weight each item rate includes all taxes pillow of size 26*16 size, poly fiber each item rate includes all taxes mosquito net of size 36*78 size, poly cotton suitable to the single cot each item rate includes all taxes pillow cover of size 28*18 size, plain cotton each item rate includes all taxes bed spread of size 60*90 size, plain cotton each item rate includes all taxes plastic chair each item rate includes all taxes steel chair 3/4 round pipe frame seat and back performed cr sheet black painting each item rate includes all taxes discussion table - metal leg providing and fixing discussion table metal leg consisting of 25 mm thick plpb table top edge bounded ms crca sheet round plate at bottom and 75 mm dia pol at centre with 25 x 25 tube welded at top hardware-l bkt and screw leg ., as per specifications, drawings and as directed by engineer in charge 900 mm dia x 750 mm ht each item rate includes all taxes supplying patti type fluorescent tube light fitting of 4 suitable for 28 watts flourescent tube fitting made out of ms sheet and stove enameled with hf electronic ballast locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230volts ac supply including t5 lamp. fixing all types ;and all capacities of fluorescent/ false ceiling/ spot light/cel/led fittings indoor on the wall ceiling rafter girders using 23/0.0076 twin twisted pvc insulated wires, required nos of round blocks and clamps. supplying 25 litres capacity vertical/horizontal type wall mounting electrical water heater with 22 swg copper/ss sheet metal inner container tinned inside and anticorrosive paint outside and 20swg ms sheet metal outer cover between inner and outer container filled with glass wool complete with inlet and outlet pipes so arranged that water flow inside results in water to flow out from the inner container without turbulence. the inner container shall have direct immersion type copper tube nickle plate 2kw capacity element with a neon indicator fitted with 20a capacity 25-85 degree centigrade range thermostat. the water heater shall completely be wired with 40/0.0076 inch 3 core copper flexible wire of 1.5meters length and the outer container provided with heavy gauge brackets for wall mounting. ksbr 15-15-.1: providing and applying paiting in two coats with plastic emulsion paint with primer of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface sven and sand paper smooth, cost of materials, labour, complete as per specification. ksbr 15-15-.2: providing and applying paiting in two coats with plastic emulsion paint with primer of approved broand on ceiling and/or sloping roof surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface sven and sand paper smooth, cost of materials, labour, complete as per specification. providing and finishing external walls in two coats over one coat 100 acryilic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials,labour,, complete as per specification ksrb 15.17.7 : providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give and even shade, cleaning the surface of all dirt, dust and forign matter, sand papering including cost of materials, labour, complete as per specifications.
