Active tenders in Insulating Oil

tender for inhibited mineral insulating oil tois 12463 - 1988 & railway requirement as per rdso l.no-ti/psi/insoil/policy/07 dt 27.02.07 and ti/psi/insoil/policy/08 dt 06.02.08 .

supply of (a) h1(a)/8010-000281 varnish insulating air drying oil ltr 393.50 (b) f1/8020-400002 brushes paints and varnishes flat 25mm nos 289 (c) h1(b)/3439-000165 flux soldering paste nos 321 (d) h1(b)/6810-000568 blue laundry kgs 209

supply of transformer insulating oil in tanker (fresh transformer oil)

supply of insulating oil for transformer as per powergrid ts.

supply of new insulating oils

supply of insulating oil for transformer and switch gear

tender for inhibited mineral insulating (transformer) oil as per is 12463-1988 withlatest revision.amendment no.1 of year 2010. packed in 209/210 ltrs. non returnablem.s. drum.

tender for inhibited mineral insulating (transformer) oil as per is 12463-1988 withlatest revision.amendment no.1 of year 2010. packed in 209/210 ltrs. non returnablem.s. drum.

tender for inhibited mineral insulating oil as per type ii transformer oil conforming to is: 335:2018 suitable forrailway requirement as per rdso letter no. ti/psi/insoil/policy/19 dtd.26.07.19 .

tender for inhibited mineral insulating oil conforming to is 335(2018)as per rdso letterno:ti/psi/insoil/policy/19 dt:26/07/2019and with the following additionalcharacteristics requirements. i)oxidation stability, a)neutralization value afteroxidation[max]requirements,0.2mg koh/gm. b)total sludge after oxidation[max]requirements 0.05 bymass.ii)ageing characteristics after accelerated ageing requirements, as pers.no.xiii of table of is:335-1993.(iii)oxidation inhibitor (dbpc) content (max)requirements, range (0.25 - 0.30) by mass.(inspection:rites) .

supply of unused mineral insulating oils for transformers and switch.

tender for inhibited mineral insulating oil conforming to is 335(2018)as per rdso letterno:ti/psi/insoil/policy/19 dt:26/07/2019and with the following additionalcharacteristics requirements. i)oxidation stability, a)neutralization value afteroxidation[max]requirements,0.2mg koh/gm. b)total sludge after oxidation[max]requirements 0.05 bymass.ii)ageing characteristics after accelerated ageing requirements, as pers.no.xiii of table of is:335-1993.(iii)oxidation inhibitor (dbpc) content (max)requirements, range (0.25 - 0.30) by mass.(inspection:rites) .

tender for inhibited mineral insulating oil for 3 phase loco transformer as per iec :60296-2003 and clw spec.no.-clw/es/3/0172 (latest and rdso requirement) as per m/s.shellfor shell diala s3zx-i, new delhi or m/s. apar rabale for power oil to-10x or m/s.savita-navi mumbai works or equivalent rdso approved brands.

procurement of ehv grade transformer oil mineral insulating oil conforms to is 335 2018, 5th revision for dvc rtps

tender for inhibited mineral insulating oil as per is: 335 [2018] and railways requirements as per rdso letterno.ti/psi/insoil/policy/19 dt.26.07.19 or latest .

tender for inhibited mineral insulating oil conforming to iec: 60296-2003 and clw spec. no. clw/es/3/0/72(latest and rdso requirement) and rdso letter no. ti/psi/trnpwr/policy/16/01 dated 28.10.16.

tender for inhibited mineral insulating oil for 3 phase loco transformer as per iec :60296-2003 and clw spec.no.-clw/es/3/0172 (latest and rdso requirement) as per m/s.shellfor shell diala s3zx-i, new delhi or m/s. apar rabale for power oil to-10x or m/s.savita-navi mumbai works or equivalent rdso approved brands.

tender for inhibited mineral insulating transformer oil as per is: 335/2018 and railways requirement as perrdso letter no. ti/psi/insoil/policy/19 dated 26/07/2019 .

tender for inhibited mineral insulating oil conforming to is 12463/1988 and railway requirement as per rdsoletter no.ti/psi/insol/policy/07 dt 27/02/07 and ti/psi/insoil/policy/08 dt 06/02/2008 and as per rdsoletter no.ti/psi/trnpwr/policy/16/01 dated 28/10/2016 and with the following additional characteristicsrequirements. i) oxidation stability, a) neutralization value after oxidation (max) requirements, 0.2mg koh/gm, b)total sludge after oxidation (max) requirements 0.05 by mass, ii) ageing characteristics after acceleratedageing requirements, as per s.no.xiii of table of is:335-1993, iii) oxidation inhibitor (dbpc content (max)requirements, range (0.25 - 0.30) by mass.

tender for inhibited mineral insulating oil confirming to is:12463-1988 or latest with additional requirementstipulated in rdso lt no. ti/psi/insoil/policy/07 dt. : 27.02.2007 .