Active tenders in Stay Rod

running contract fordeposit works under edd-baheri

supply and errection of double pole comprising of 2 nos. 410 sp-55 steel tubular pole11 meter long including 3 nos. 100x50mm ms channel 2.24 m long and 1 no. 75x40mm ms channel 2.24 m long , clamps, packing pieces etc duly painted all complete as per direction the e/icsupply and laying of 32 mm x 6 mm g.i. strip from earth electrode directly in the ground as required complete in all respect. 60.00 mtr. pksada 282010 10 9 n/a supply and erection of stay set at least 3.5 metres away from the pole complete with galvanised 19 mm dia x1.80 metre long stay rod, 30 cm x 30 cm x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm x 600 double screw tightener, 7/4.00 mm g.i stay wire etc. in 1:3:6 cement concrete complete in all respect. 40.00 nos. pksada 282010 10 10 n/a supply and erection of overhead line with acsr conductor on poles / service bracket including binding etc. complete in all respects. 7100.00 kg. pksada 282010 10 11 n/a supply and erection of overhead line with g.i. wire no. 8 to 4 swg on poles/serivce bracket including binding etc. complete in all respect. 4920.00 kg. pksada 282010 10 12 n/a supply and erection of d clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. 160.00 nos. pksada 282010 10 13 n/a supply and laying of 240 sq. mm. 3 core standered aluminium conductor xlpe (cross linked polyethylene) insulated pvc bedded, galvanised flat steel strip armoured cables confirming to i.s. 7098 (part-ii with latest amendments) 11 kv grade at a depth of 900 mm below ground level over a cushion of 100mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. the armouring of cable shall be properly connected with earth con

rate contract for financial year 2021-22, for execution of works under various ongoing schemes in bandipora and gurez.

bp work- cartage of the following material from 132 kv taj agra to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, tandp, carrier etc, required for proper completion of work. (distance 00- 70 kms.) 8.5 meter long pcc pole 9/11 mtr long stp pole 250 kva transformer 100 kva transformer 25/63/16 kva transformer 11 kv 3x50 3x70 3x120 xlpe cable line material viz, aerial bunch conductor/weasal conductor/dog g.i. earth wire, cross arm, angle, channel, insulators, clamps and other line material as required. cutting of kharanja / metallic road/concrete portion while digging pit for erection of pcc/stp poles, stays rod and giving the exact shape after execution work as per direction of supervising engineer. it includes the cost of labour, tandp, carrier etcreauired for proper completion of work. erection and grouting of single pole of 8.5 meter long pcc pole, 9/11 long stp pole in 1:2:4 (cement sand, and bricks blast), including fixing of accessories for ht/lt line as per respo manual and as per direction of engineer incharge. making ht t-off connection on existin mains, labour, tandp and carrier etc, required for proper completion of work. erection and grouting of stays in 1:2:4 ratio (cement sand, and bricks blast) as per respo manual and as per direction of supervising engineer. fixing of earthing rod as per respo manual and as per direction of supervising engineer. laying, sagging and stringing and umpiring/ binding etc of the following conductor on the aforesaid newly erected poles as pre respo manual and as per direction of supervising engineer, including the cost of arrangement of labour, tandp carrier etc required for proper completion of work. acsr weasal conductor acsr dog/recon conductor abc bunch conductor 3x50,3x95, 3x120 removal of following t/f from double/single pole after opening ht/lt connections and their carriage to 132 kv taj store agra including loading and unloading at both and. 100 kva t/f 63 kva t/f 25 kva t/f/ 10 kva t/f construction of plinth of size 5x6x5 for the installation of 250/400 kva distribution transformers. the size of plinth shall be of 4 above the ground level. at the bottom there shall be brick ballast pad of size 5x6x3 thick in ratio 1:3:6 [cement, sand and brick ballast]. the first class brick wall work shall be 9 thick in ratio 1:4 [cement and sand]. the hollow portion among the wall shall be filled up with the brick ballast properly hammered and rammeredas per direction of supervising engineer. on the top of the well there shall be 12 mm thick iron rod at distance of 9 and rcc work in ratio 1:3:6 [cement, sand and grit stone] there shall be plastering all over the plinth 12 mm thick in ratio 1:4 [cement and sand] above the ground level. proper watering and curing of the plinth shall be carried out as per direction of supervising engineer., and also including the cost of arrangement of labourer, tandp etc required for proper completion of work. fencing of 250/400 kva t/fs as per following specifications- fabrication of 50x50x6 mmsize ms angle frame of size 900x1500 mm, alongwith450 mm long angle for grouting the frame and fixing of 2x1.5, 10 swg welded wire mesh with m.s. strip of 24x5 mm size all around the frame and drilling 9 mm holes inside of frames at a distance of 300 mm for jointing of frame with the help of bolts and nuts including the cost of all required material the width of panal may vary as per site conditions.a- grouting and fixing of angle iron frames in ratio 1:2:4 (cement coarse sand and stone ballast) in the pocket of 150x150 mm all round the plinth and bolting of frames with 25x8 mm size bolts and nuts.b- making main gate in front of the plinth of size 3000x2400 mm by making two leaves of size 3000x1200 mm size and grouting the same in ratio and method mentioned as item (b) above fixing with hinges with dandles for locking system.c- painting of entire wire mess angle iron etc, with bus green super enameled pain to two coats on the primer two coats of red oxide chemical earthing of neutral and body of 250/400 kva power transformers installed at substation, by inserting of 50 mm dia gi pipe having 25 mm gi chemical filled pipe in between pipe in pipe) isi marked b grade connecting with galvanized ms flat of size 50x6 mm with body of transformers to above pipe in pipe (pip) and filling of chemical crystalline conductive mixture containing highly conductive mixture around the (pip) up to 3 meters including making of chamber at the top of earthing complete in all respect as per following technical details. earth pipe material mild steel duly galvanized. main electrode diameter- 25 mm. auxiliary electrode pipe diameter- 50 mm. wall thickness of main electrode- 02 mm and as per direction of supervising engineer. installation of following t/f on newly constructed double pole in proper alignment direction and making ht/lt connection. 250 kva t/f 100 kva t/f 25/ 63 kva t/f / 16 kva removal of existing xlpe cable from existing making bundle and carriage the same from work side to 132 kv taj store agra including loading and un loading at both ends. laying of 3x300 sqmm 11 kv xlpe cables by making required loop (at a distance of 4 mtr.) including excavation of earth one meter deep and laying brick (18 nos in one mtr.) local sand filling over layed cable, as per respo norms including proper filling of earth and leveling and rammuring etc, complete work in all respect. fixing/ filling of heat shrinkable cable boxes, indoor and outdoor complete work in all respect.

bp- cartage of the following material from 132 kv taj agra to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, tandp, carrier etc, required for proper completion of work. (distance 00- 70 kms.) 8.5 meter long pcc pole 9/11 mtr long stp pole 100 kva transformer 25/63/16 kva transformer 11 kv 3x50 3x70 3x120 3x85 xlpe cable line material viz, aerial bunch conductor/weasal conductor/dog g.i. earth wire, cross arm, angle, channel, insulators, clamps and other line material as required. cutting of kharanja / metallic road/concrete portion while digging pit for erection of pcc/stp poles, stays rod and giving the exact shape after execution work as per direction of supervising engineer. it includes the cost of labour, tandp, carrier etcreauired for proper completion of work. erection and grouting of single pole of 8.5 meter long pcc pole, 9/11 long stp pole in 1:2:4 (cement sand, and bricks blast), including fixing of accessories for ht/lt line as per respo manual and as per direction of engineer incharge. making ht t-off connection on existin mains, labour, tandp and carrier etc, required for proper completion of work. erection and grouting of stays in 1:2:4 ratio (cement sand, and bricks blast) as per respo manual and as per direction of supervising engineer. fixing of earthing rod as per respo manual and as per direction of supervising engineer. laying, sagging and stringing and umpiring/ binding etc of the following conductor on the aforesaid newly erected poles as pre respo manual and as per direction of supervising engineer, including the cost of arrangement of labour, tandp carrier etc required for proper completion of work. acsr weasal conductor acsr dog/recon conductor abc bunch conductor 3x50,3x95, 3x120 removal of following t/f from double/single pole after opening ht/lt connections and their carriage to 132 kv taj store agra including loading and unloading at both and. acsr weasal conductor acsr dog/recon conductor abc bunch conductor 3x50,3x95, 3x120 63 kva t/f 25 kva t/f/ 10 kva t/f installation of following t/f on newly constructed double pole in proper alignment direction and making ht/lt connection. 100 kva t/f 25/ 63 kva t/f / 16 kva removal of existing xlpe cable from existing making bundle and carriage the same from work side to 132 kv taj store agra including loading and un loading at both ends. laying of 3x300 sqmm 11 kv xlpe cables by making required loop (at a distance of 4 mtr.) including excavation of earth one meter deep and laying brick (18 nos in one mtr.) local sand filling over layed cable, as per respo norms including proper filling of earth and leveling and rammuring etc, complete work in all respect. fixing/ filling of heat shrinkable cable boxes, indoor and outdoor complete work in all respect.

supply of stay rod

welding, bending, greasing of threaded portion painting and delivering as 11 22 lines stay rod- miscellaneous works.

welding bending greasing of threaded portion painting and delivering as 11 22 lines stay rod.

annual rate contract sub division mendhar- electrical and maintenance works. -1.01 supply, loading, transportation, insurance, unloading, carriage and delivery at site and erection of 8 mtr. long st poles (410, sp-15) with pit excavation. (as per recommended is/rec standard) 1.02 supply, loading, transportation, insurance, unloading, carriage and delivery at site and erection of 9 mtr. long st poles (410, sp-33) with pit excavation. (as per recommended is/rec standard) 1.03 supply and laying of cement bottoming 1:2:4 mix as per rec standards 0.5 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1800mm for st poles for refilling the pit (the leftover pit after concreting to be filled with soil and boulders)note: please refer pole drawings for details. (as per recommended is/rec standard) 1.04 supplying and erection of gi channel v cross-arm (75 x 40x6mm) with gi angle pole top bracket (50x50x6 mm) including back clamps of 50x8 mm for fixing v-cross arm and pole top bracket without making holes in the st pole as per rec standard for single pole structure. note: please refer pole drawings for details (as per recommended is/rec standard) 1.05 supplying and erection of gi channel (75x40x6 mm) cross arms for h-frames, gi angle( 50x50x6 mm) cross braces for h-frames, 50x50x6 mm angle support for guard netting including clamps as per rec standard. (as per recommended is/rec standard) 1.06 supplying and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn) (as per recommended is/rec standard) 1.07 supplying and fixing of 11 kv disc insulators (polymer) complete with fittings (45kn) depending upon conductor size. (as per recommended is/rec standard) 1.08 supply and erection galvanised stay set with 50x8mm stay clamp, guy insulator(2nos.), anchor plate (200x 200 x 6 mm), nut bolts, 2 nos turn-buckles, 1.8m long, 16 mm diameter solid gs stay rod and 7/3.15 mm dia gi stranded wire complete for 11 kv tension points. (as per recommended is/rec standard) 1.09 supplying and fixing of pole earthing complete by gi pipe 40 mm or gi rod 20mm 2.5 mtr long through gi strip(25x3) to each ht pole including supply and welding of gi channel 70x40x150 on pole for earth connection (as per recommended is/rec standard) 1.1 supplying and erection of danger plates with clamps with writing in english and regional language 1.11 supply and fixing of anti-climbing device/gi barbed wire binding with clamps at a distance of 30 to 40 cm at a height of 3.5 to 4 m from ground level. at-least 2 kgs gi barbed wire(12 swg) is to be used per pole for the purpose. (as per recommended is/rec standard) 1.12 supplying and fixing of galvanized nuts and bolts of sizes. 1.13 supply and fixing of parallel grove (pg) clamps, binding wire etc 1.14 supply, loading, transportation, insurance, unloading, carriage and delivery at site, laying, stringing and binding of conductor including joints with pg clamps of required size30 mm2 acsr ( weasel) (as per recommended is/rec standard) 1.15 supply and painting of each pole along with accessories by 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint) 1.16 supply and fixing of aluminium jointing sleeves 2 erection of 11/0.433 kv distribution transformer(note: for detailed specifications please refer attached sbd which forms a part of the tender) 2.01 supply, loading, transportation, insurance, unloading, carriage and delivery at site and installation of 25kva, 11/0.433 kv distribution transformer, energy efficiency level-ii, aluminium wound, oil filled, with lt cable termination box with detachable aluminium gland plate. (as per recommended is/rec standard) 2.02 supply, loading, transportation, insurance, unloading, carriage and delivery at site and installation of 63kva, 11/0.433 kv distribution transformer, energy efficiency level-ii, aluminium wound, oil filled, with lt cable termination box with detachable aluminium gland plate. (as per recommended is/rec standard) 2.03 supply, loading, transportation, insurance, unloading, carriage and delivery at site and installation of 250kva, 11/0.433 kv distribution transformer, energy efficiency level-ii, aluminium wound, oil filled, with lt cable termination box with detachable aluminium gland plate.(as per recommended is/rec standard) 2.04 supply, loading, transportation, insurance, unloading, carriage and delivery at site and installation of 100kva, 11/0.433 kv distribution transformer, energy efficiency level-ii, aluminium wound, oil filled, with lt cable termination box with detachable aluminium gland plate. (as per recommended is/rec standard) 2.05 supply and installation of lt bi-metalic connectors for making connection from dt bush rod to aluminium cables (as per recommended is/rec standard) 2.06 supply and fixing of lt distribution box for 63 kva dtr with tpn mccbs for incomer and suitable mccbs for outgoing circuits with terminal extensions. (as per recommended is/rec standard) 2.07 supply and fixing of lt distribution box for 100 kva dtr with tpn mccbs for incomer and suitable mccbs for outgoing circuits with terminal extensions. (as per recommended is/rec standard) 2.08 supplying and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn) (as per recommended is/rec standard) 2.09 supply and installation of 11 kv disc insulators (polymer) complete with fitting( 45 kn) (as per recommended is/rec standard) 2.10 supply and installation of gapless surge arrestor,9 kv,10 ka, la with (polymer) housing, station type (as per recommended is/rec standard) 2.11 supply and installation of 11 kv, g.o ab switch , 3-phase, 200a (as per recommended is/rec standard) 2.12 supply and installation of 11 kv horn, gap fuse set, 3-phase, 100a (as per recommended is/rec standard) 2.13 supply and fixing of un armoured single core xple, frls cable (70 mm2) (as per recommended is/rec standard) 2.14 supply and fixing of un armoured single core xple, frls cable (120 mm2) (as per recommended is/rec standard) 2.15 supply, loading, transportation, insurance, unloading, carriage and delivery at site and erection of 9 mtr. long st poles (410 sp-33) with pit excavation(note: the poles shall be provided by jkpdd) (as per recommended is/rec standard) 2.16 supply and laying of cement bottoming 1:2:4 mix as per rec standards 0.5 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1800mm for st poles for refilling the pit (the leftover pit after concreting to be filled with soil and boulders)note: please refer pole drawings for details. (as per recommended is/rec standard) 2.17 supplying and erection of gi channel/angle cross arms including fixing gi channels ( 100x50x6mm) / (75x40x6 mm) / angles(50x50x6 mm) with 50x8 mm back clamps without drilling/punching holes in the poles. (as per recommended is/rec standard) 2.18 supply and erection galvanised stay set with 50x8mm stay clamp, guy insulator(2nos.), anchor plate (200x 200 x 6 mm), nutbolts, 2 nos turn-buckles, 1.8m long, 16 mm diameter solid gs stay rod and 7/3.15 mm dia gi stranded wire complete for 11 kv tension points as per rec standard. (as per recommended is/rec standard) 2.19 excavation of earthing pits of dia = 600 mm and depth= 3000 mm, supplying and fixing of 3 no. sub station earthing by gi pipe 40 mm or gi rod 20mm, 2.5 mtr long through gi strip of 50x6 mm 1 no for neutral earthing and 25x3 mm 2 nos (for 2 nos transformer body earth, 2 nos pole earth, 1 no. la earth and 1 no. go handle earth). (note: for la earth 1 pipe shall be kept separate) gi nuts, bolts and clamps, refilled with earth enhancement materials and earthing chamber made of brick masonary with rcc slab cover. (as per recommended is/rec standard) 2.20 supplying and erection of 11kv danger plates with clamps with writing in english and regional language 2.21 supplying and fixing of galvanized nuts and bolts of sizes. 2.22 supply and fixing of sundry items (aluminum lugs for fixing cable to mccb 8 nos including crimping of the lugs, jumpering of dt accessories through acsr conductor, binding tapes) (as per recommended is/rec standard) 2.23 supply and painting of each pole along with accessories by 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint) 2.24 supply and fixing of wedge connectors/pg clamps (as per recommended is/rec standard) 2.25 supply and fixing of anti-climbing gi barbed wire binding with clamps at a distance of 30 to 40 cm at a height of 3.5 to 4 m from ground level. at-least 2 kgs gi barbed wire(12 swg) is to be used per pole for the purpose. (as per recommended is/rec standard) 2.26 supply and fixing of required amperage three phase four wire trivector transformer meter with ct of required ratio. (as per recommended is/rec standard) 3 erection of 1km of lt line on conductor, 3-ph, 4-wire,(note: for detailed specifications please refer attached sbd which forms a part of the tender) 3.01 supply, loading, transportation, insurance, unloading, carriage and delivery at site and erection of 8 mtr. long st poles (410, sp-15) with pit excavation. (as per recommended is/rec standard) 3.02 supply and laying of cement bottoming 1:2:4 mix as per rec standards 0.5 cum/pole, muffing 20 cm above ground level ,including plaster and curing of concrete in size of 600x600x1800mm for st poles for refilling the pit (the leftover pit after concreting to be filled with soil and boulders)note: please refer pole drawings for details. (as per recommended is/rec standard) 3.03 supply and fixing of mukky clamps for lt shackle insulators with gi back clamps to be fixed without drilling/punching of poles on st poles. (as per recommended is/rec standard) 3.04 supplying and fixing of shackle insulators (polymer) ( 16 kn) (as per recommended is/rec standard) 3.05 supply and erection galvanised stay set with 50x8mm stay clamp, guy insulator(2nos.), anchor plate (200x 200 x 6 mm), nut bolts, 2 nos turn-buckles, 1.8m long, 16 mm diameter solid gs stay rod and 7/3.15 mm dia gi stranded wire complete for 11 kv tension points as per rec standard.(as per recommended is/rec standard)

regarding constuction of old and new line under deposit work scheme in the area of edsd, sardhana dehat under edd-ii, meerut - cartage of following material from store center meerut to je store including loading and unloading at both ends maximum distance up to 40 km. : a) pcc pole8.5 mrt long/st pole 11 mtr long. b)linematerialssuchas11kvcrossarms11kvpin,11kvpininsulator,11kvdisc,stayrod,staywireacsrweaselconductor,giwire, ms angle iron and ms channel, tpmo, fuse set etc. c)25kvto100kvt/fincludingcompleterelatedmaterialrequiredfortransformer.10kvto100kvt/fincludingcompleterelatedmaterialrequired for transformer. cartageoffollowingmaterialfromjestoretositeofworkincludingloadingandunloadingatbothendsmaximumdistanceupto40km.:a)pcc pole8.5 mrt long/st pole 11 mtr long. b)linematerialssuchas11kvcrossarms11kvpin,11kvpininsulator,11kvdisc,stayrod,staywireacsrweaselconductor,giwire, ms angle iron and ms channel, tpmo, fuse set etc. c)25kvto100kvt/fincludingcompleterelatedmaterialrequiredfortransformer.10kvto100kvt/fincludingcompleterelatedmaterialrequired for transformer. erectionofpccpole8.5mtrlong/stppole11mrtlongafterdiggingapitofsize1.20x0.60x1.6mtrinalltypeofsoilincludingbackfillingofthepolewithproperrammingaftercompleton of work. fabrication and fixing of all 11 kv h.t/l.t. line accessories. erectionofdoublepoleonpccpole8.5mtrafterdiggingapittofsize1.20x0.60x1.6mtrinalltypeofsoilforeachpoleincludingbackfillingofthepoewithproperrammingaftercompletion of work. fabricationandfixingofmsangleandmschannel,fixingall11kv accessories tpmo, fuse set 11 kv pin insulators. mountingof25to100kvat/fwithproperjumpingofhtsideandfixing of cable on lt. side of t/f . makingasectionpoletoexistpoleafterfabricationandfixingoftchannel fixing of all 11 kv accessories. erectionofstayrodcompleteafterdiggingapitofsize1.20x0.60x1.6mtrandgroutingthesameinblockofsize0.60x0.60x0.30mtrandnuzzlingattheothendsandfillingthepitwithexcavatedearthsoilwithproper ramming. layingliftingstringingofpropersaggingofacsrweaselconductorfor3 phase, 3 wire 11 kv line including binding and jumpering properly. layingliftingstringingofpropersaggingofacsrrabbitconductorfor3 phase, 3 wire 11 kv line including binding and jumpering properly. layingliftingandsaggingofltlinewitha.c.s.r.weaseal/rabbitconductor including proper binding and jumpring:-a) 3 phase 4 wire line. b) 2 phase 3 wire line. c) 1 phase 2 wire line eartinghofeach11kvlinepopleandt/fproperlyafterdriveofelectrodesifsize20mmx250mmandconnectiontheearthingpointwithgl wire. guardingoflinewithg.i.wirehaving2nohorizontalwireand3mtrdistanceodflacesoftenswgg.iwireafterfabricationofguardcrossarms of and fixing the same in supports. dissmentlingofdamagedandbrokenp.c.c./s.t.pole/r.s.joistbydigging the pits and removel of complete h.t./l.t. line accessories . cuttingandchoppingtreebranchesnearsideoflineformakingtheclearancebetween line and tree. providing and fixing stay clamps . providing and fixing holding clamps . providing and fixing lt clamps . providing and fixing lt insulator clamps . providing and fixing bolt and nuts . figures

carriage of following from 132 kv taj agra to dump site through the kacha and pakka road including the work of its loading and unloading at the respective ends including arrangement of labour, tandp, carrier etc. required for proper completion of work.(distance approx 40 - 70 kms.) pcc pole 8.5 mtr. long 25 kva t/f 63 kva t/f 10 kva t/f 11 kv 3120 / 3300 xlpe cable line material viz. aerial bunch conductor/weasal conductor/dog, g.i. earth wire, cross arm, angle, channel, insulators, clamps, stay, earth rod and other line material, if required cutting of kharanja/mettalic road/concrete portion while digging pit for erection of pcc/stp poles, stays rod and giving the exact shape after exicution work as per direction of supervising engineer. it includes the cost of labour, t and p, carrier etc reauired for proper completion of work. erection and grouting of single pole of 8.5 mtr. long pcc pole in 1:2:4 (cement sand, and bricks blast), including fixing of accessories for htline as per respo manual and as per direction of engineer incharge. erection and grouting of single pole of 8.5 mtr. long pcc pole in 1:2:4 (cement sand, and bricks blast), including fixing of accessories for lt line as per respo manual and as per direction of engineer incharge. erection and grouting of double pole on 8.5 mtr. long pcc poles in 1:2:4 (cement sand, and bricks blast), including fixing of accessories for double pole s/s as per respo manual and as per direction of engineer incharge. making ht t-off connection on existing mains, labour, tandp and carrier etc. required for proper completion of work. erection and grouting of stays in 1:4:8 ratio cement, sand and stone ballst, its tightning, binding, nozelling etc. of stay wire with stay and stap clamp of pole as per site requirement fixing of earthing rod as per respo manual and as per direction of supervising engineer including the cost of arrangement of labour, tandp, carrier etc. required for proper completion of work. laying sagging stringing and binding and jumpering etc of following conductors for construction of 11 kv line/lt acsr weasal conductor laying of 3120 / 3300sqmm 11 kv xlpe underground cable (horigently), approximately 4.00 mtrs. below the road crosing (approx. 135 mtrs. u/g under the line and 30 mtrs in air (vertically) on two nos. double pole at both sides of road crosing, in the following way fixing/filling of heat shrinkable cable boxes, indoor and outdoor complete work in all respect. mounting of 10/16kva t/f on newly erected pole mounting of 25/63 kva t/f on newly erected double pole guarding of 11 kv line by laying, stringing, sagging and binding of 2 nos. parallel gi wire 6 swg after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (tillis) of gi wire at distance of 3 mtr as per site requirement. fixing of lt dustribution cable to premises of stw operating room from double pole cutting of tree chopping andtrimming of tree branches to clear the line route to give 02 meter. horizontal and vertical clearance to the line coming in the route of diff . feeder as per direction.

providing and supply pre-fabricated anchor plate with gi stay rod for the guys of swaged poles as per p and d unit drg. no. tm-12785 at hpt air kingsway camp. .

supply of stay rod with top and bottom plate as per dlws drg.no. 622v34830, alt-c.

auction sale of lot no: meager/467 lot name: stay rod etc.

supply of stay rod mounting plate for plate type cattleguard of wdg3d loco todrg.no: goc/d/sk- 4-14719.

t.s.no. 0470021 supply of stay rod- electrical goods/equipments.

supply of stay rod 16mm dia gi (lt stay rod)- raw materials.

supply of stay rod - (2000 nos).

1 cartage of pcc/st poles from esc, bijnor to site including loading and unloading at both end. 2 cartage of trasnformer 25/63/100/ kva from esc, bijnor to site including loading and unloading at both end. 3 cartage of trasnformer 10 kva from esc, bijnor to site including loading and unloading at both end. 4 cartage of 11kv/33 kv ct/pt unit metering pole mounted unit /metering cuble including loading and unloading at both end. 5 cartage of all line material esc bijnor to site including loading and unloading at both end. 6 carriage of xlpe cable as per required for connection from esc, bijnor to site including loading and unloading at both end. 7 trimming/chopping of tree branches coming in the route of proposed existing line for electrification. 8 digging of pit providing and laying of stone pad (30030075 mm) . 9 erection of st/pcc poles of 11 kv ht/lt cross arms, pins, pins insulators and all type of clamps with nuts, bolts and washers etc as per respo norms. 10 grouting of pcc/st poles. 11 erection of double pole including fabrication of ms angel, channel and fitting of all types of clamps with nuts, bolts and washers etc. as per respo norms. 12 digging of pits for stay rods and grouting of stay as per respo norms of stay rods at both ends pits binding etc complete as per respo norms. 13 earthing of pcc/st poles as per respo norms. 14 laying, stringing, sagging and binding of acsr conductor. 15 laying of xlpe cable (size 3x120 sqmm) as per required for connection including cost of sand and brick 16 guarding of 11kv line in hvds system as per respo norms 17 making of 11 kv cable jointing kit as per required for connection. 18 making of 33 kv cable jointing kit as per required for connection. 19 mounting of ct/pt unit metering pole mounted unit with clamps and making erection complete in all respect as per required for connection 20 mounting of 25/63/100, 11/0.4 kva t/f on double pole clamps and making connection with 11kv line complete in all respect 21 mounting of 10 11/0.4 kva t/f on pole clamps and making connection with 11kv line complete in all respect 22 providing and fixing of barbed wire on each 11 kv poles. (one kg. per pole) 23 providing and fixing of danger board on 11 kv line. 24 carriage of 11 kv pilfur resistant metering cubical.

supply of lead acid battery.