supply of 2s fronttype choco size shall be 1374 width mm x 698.5 depth mm x 890 height mm . the understructure shall be made with steel erw tube section of size 80 x 40 x 2.5 mm thick with powder coat finish . understructure shall consist of two welded leg assemblies connected by means of welded seat aide tube assy and welded desk side tube assy on both sides . sturdy anchoring by anchor bolton to base of 10 mm thick plate for proper resting of structure.approved make godrej, steelcase, haworth. 3s fronttype choco size shall be 2044 width mm x 698.5 depth mm x 890 height mm . the understructure shall be made with steel erw tube section of size 80 x 40 x 2.5 mm thick with powder coat finish . understructure shall consist of two welded leg assemblies connected by means of welded seat aide tube assy and welded desk side tube assy on both sides . sturdy anchoring by anchor bolts on to base of 10 mm thick plate for proper resting of structure.approved make godrej, steelcase, haworth. 4s fronttype choco size shall be 2713 width mm x 698.5 depth mm x 890 height mm . the understructure shall be made with steel erw tube section of size 80 x 40 x 2.5 mm thick with powder coat finish . understructure shall consist of two welded leg assemblies connected by means of welded seat aide tube assy and welded desk side tube assy on both sides . sturdy anchoring by anchor bolts on to base of 10 mm thick plate for proper resting of structure.approved make godrej, steelcase, haworth. size of conference table for 2 seater is 1350 x 710 x 740 , work surface-made of 36mm thick mdfone side prelaminate board conforming to is14587: 1998 with 0.4mm pvc membrane pressed on to top and having chamfered edge. full length access panel is provided with soft closing hinges inline with worktop edge. worktop is available in various shapes as shown above.approved make godrej, steelcase, haworth. high back seat/back assembly : the cushioned seat should be made of injection molded plastic outer and inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 452 kg/m3,and hardness load 16 2 kgf for 25 compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.90.03cm x 0.16 0.0128cm. it upholstered with pure leather.the chair is conforms to the ansi/bifma e3-2014e furniture sustainability standard and level 2 bifma and greenguard certified.approved make godrej, steelcase, haworth.
