supply and erection of galvanized iron pole with galvanizing done in single dipping (average coating thickness minimum 65 microns) swaged tubular pole conforming to is: 2713-1980 (part i to ii) with galvanised base plate, the pole shall be made from steel tube & pipe (is:1141, fe 410) including excavation of the pit and filling the same with c.c. of m-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. duly finished with cement plaster, earthing terminals, cable entry with 32 mm dia. b class gi cable sleeves complete as required. of following height & designation. ( see table p - 02 for specs. ) all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure a attached with this bsr .
